Bututun ƙona siliki na Carbide da bututun radiant
Silicon Carbide yumbu mai ƙonewa nozzles
Bututun ƙona Silicon Carbide ga abokan cinikinmu. Ana amfani da waɗannan samfuran sosai a masana'antu daban-daban kamar tashar wutar lantarki, murhun mota, murhun murhu da kuma murhun rami. Ana kuma amfani da su a cikin murhun masana'antu da dama, waɗanda suka haɗa da man fetur da iskar gas. Ana ƙera su ne da taimakon injuna da kayan aiki na zamani. Muna bayar da waɗannan samfuran a farashi mai araha. Abokin ciniki zai iya samun waɗannan samfuran gwargwadon buƙatarsa.
Bututun ƙona sandar RBSiC (SiSiC) yana da halaye masu kyau kamar juriyar lalacewa, taurin kai mai tsanani, juriyar tsatsa, juriyar zafin jiki mai yawa, juriyar iskar shaka, tsawon rai na sabis.
Ana amfani da jerin samfuran sosai a cikin kowane nau'in kayan aiki don yashi mai laushi.
| abu | naúrar | bayanai |
| zafin aiki | °C | 1380 |
| yawa | g/cm ³ | >=3.02 |
| bude porosity | % | <0.1 |
| ƙarfin lanƙwasawa | Mpa | 250 (20°C) |
| Mpa | 281(1200°C) ) | |
| modulus na elasticity | Gpa | 330 (20°C) |
| Gpa | 300 (1200°C) ) | |
| kwararar zafi | W/mk | 45(1200°C) ) |
| ma'aunin faɗaɗawar zafi | K-1*10-6 | 4.5 |
| tauri | 9 | |
| alkaline mai hana acid | Madalla sosai |
Sigar Fasaha ta bututun ƙona silicon carbide:
| Yawan yawa (g/cm3) | Ƙarfin Lankwasawa (MPa)
| Taurin karyewa K1C (M·Pam1/2) | abun ciki kyauta na Si (%) | Vickers microhardness (GPa) |
| 3.03 | 326 | 4.47 | 7.76 | 25 |
Kamfanin Shandong Zhongpeng Special Ceramics Co., Ltd yana ɗaya daga cikin manyan hanyoyin samar da sabbin kayan yumbu na silicon carbide a China. SiC technical yumbu: Taurin Moh shine 9 (taurin New Moh shine 13), tare da kyakkyawan juriya ga zaizayar ƙasa da tsatsa, kyakkyawan juriya - juriya da hana iskar shaka. Rayuwar sabis na samfurin SiC shine sau 4 zuwa 5 fiye da kayan alumina 92%. MOR na RBSiC shine sau 5 zuwa 7 na SNBSC, ana iya amfani da shi don siffofi masu rikitarwa. Tsarin ƙididdigewa yana da sauri, isarwa kamar yadda aka yi alkawari kuma ingancin ba shi da nasaba da komai. Kullum muna ci gaba da ƙalubalantar manufofinmu kuma muna mayar da zukatanmu ga al'umma.
